How to replace the pedal motorcycle belt
Release time:
2023-11-02
How to replace the pedal motorcycle belt Tools/materials: socket wrench, screwdriver, air cannon. Operation method:
How to replace the pedal motorcycle belt
Tools/materials: socket wrench, screwdriver, air cannon.
Operation method:
1. To replace the transmission belt of a scooter, first remove the belt transmission box on the left side of the engine.
2. Use a pneumatic gun to remove the fixing screws of the front or rear pulley (only one front or rear can be removed, not all). After compression, the belt pulley can be removed and a new belt can be installed. During installation, the rear belt pulley should also be appropriately compressed. 3. Disassemble the transmission box, then remove the left Puli disc. When removing the Puli disc, use something to clamp the fan blades of the Puli disc. Removing the Puli disc will replace the belt. 4.5. Break off the rear clutch and insert it into the belt. Place the belt onto the front disc, then rotate the rear clutch and press it in. Pay attention to the belt specifications. Special reminder: Pay attention to safety during operation and avoid injuries caused by uncertain factors.
Related news
Contact Info
Email: 490641167@qq.com
WhatsApp: +8613958529109
Recent Post
How to replace the car generator belt
2023-11-02
The Function of Automobile Motor Belt
2023-11-02
Maintenance of Automobile Belts
2023-11-02